Centimetres to Inches Chart

Every centimetre from 1 to 30, in inches.

Runs entirely in your browser

Loading the tool…

Conversion table

FromTo

Every centimetre from one to thirty, in inches. One centimetre is 0.3937 inches, which unlike the reverse does not come out round: the inch is defined in terms of the centimetre and not the other way about, so this direction is the one that carries the recurring decimal.

Thirty rows because thirty centimetres is just under a foot, which is the range a ruler covers and most of what a person measures at a desk. Change Rows to go further, or Step to 5 for a coarser chart that fits a longer span on the same sheet.

For the table the other way up, with inches down the left, see the inches to centimetres chart.

How to use it

  1. Read the table, which is built for this pair of units when the page opens.
  2. Change Start, Step or Rows to cover a different range.
  3. Press Print for the table on its own, without the rest of the page.

Questions

How many inches is one cm?

0.3937 inches, to four places. The exact value is 1 divided by 2.54, which does not terminate, so any figure you see is rounded somewhere. Going the other way is exact, because the inch is defined as 25.4 millimetres.

Why does this chart go to 30 and the inch one to 24?

Because each stops at the length of the ruler it belongs to. Thirty centimetres is just under a foot and is where a metric ruler ends; twenty-four inches is two feet, which is a tape measure's first useful span. Both are only defaults, and the row count changes the moment you type in it.

How do I read a fraction of an inch from this?

The results are decimal, so 0.5 is a half and 0.25 a quarter. For the sixteenths a tape measure is marked in, multiply the decimal part by sixteen: 0.7874 inches is about thirteen sixteenths. The chart does not print fractions because the arithmetic behind it is decimal throughout.

Can I change the range of the chart?

Yes. Start is the first value in the left column, Step is the gap between rows, and Rows is how many there are, up to two hundred. All three update the table as you type, and the unit menus above them will convert any other pair in the same category.

Is the table built on my device?

Yes, by WebAssembly compiled from Rust, using conversion factors that are compiled in rather than fetched. Nothing is uploaded, nothing is stored, and the page prints the same table with the network off.

Centimetres to inches, 1 to 30

The chart above as a plain table, with the nearest sixteenth of an inch beside the decimal, because that is how a tape measure is marked.

CentimetresInchesNearest 1/16 inch
1 cm0.3937 in3/8 in
2 cm0.7874 in13/16 in
3 cm1.1811 in1 3/16 in
4 cm1.5748 in1 9/16 in
5 cm1.9685 in1 15/16 in
6 cm2.3622 in2 3/8 in
7 cm2.7559 in2 3/4 in
8 cm3.1496 in3 1/8 in
9 cm3.5433 in3 9/16 in
10 cm3.9370 in3 15/16 in
11 cm4.3307 in4 5/16 in
12 cm4.7244 in4 3/4 in
13 cm5.1181 in5 1/8 in
14 cm5.5118 in5 1/2 in
15 cm5.9055 in5 7/8 in
16 cm6.2992 in6 5/16 in
17 cm6.6929 in6 11/16 in
18 cm7.0866 in7 1/16 in
19 cm7.4803 in7 1/2 in
20 cm7.8740 in7 7/8 in
21 cm8.2677 in8 1/4 in
22 cm8.6614 in8 11/16 in
23 cm9.0551 in9 1/16 in
24 cm9.4488 in9 7/16 in
25 cm9.8425 in9 13/16 in
26 cm10.2362 in10 1/4 in
27 cm10.6299 in10 5/8 in
28 cm11.0236 in11 in
29 cm11.4173 in11 7/16 in
30 cm11.8110 in11 13/16 in

Heights in centimetres, in feet and inches

The conversion most people want centimetres in inches for. A height is written in feet and inches, so the inches are split into twelves: 180 cm is 70.9 inches, which is 5 feet and 10.9 inches.

HeightFeet and inches
150 cm4 ft 11.1 in
155 cm5 ft 1.0 in
160 cm5 ft 3.0 in
165 cm5 ft 5.0 in
170 cm5 ft 6.9 in
175 cm5 ft 8.9 in
180 cm5 ft 10.9 in
185 cm6 ft 0.8 in
190 cm6 ft 2.8 in
195 cm6 ft 4.8 in
200 cm6 ft 6.7 in

Common metric sizes in inches

ThingMetricInches
A4 paper21 × 29.7 cm8.27 × 11.69 in
A5 paper14.8 × 21 cm5.83 × 8.27 in
A3 paper29.7 × 42 cm11.69 × 16.54 in
Bank card (ISO ID-1)8.56 × 5.398 cm3.370 × 2.125 in
School ruler30 cm11.81 in
One metre100 cm39.37 in

Other charts

The same table for a different pair of units. The range on any of them is yours to change.

Your data stays on your device

Everything above runs inside your browser as WebAssembly compiled from Rust. Nothing you type is uploaded, logged or stored on a server. You can load this page once, go offline, and it still works.

This page makes no requests at all, to anywhere. That is not a promise in the copy: it is a Content-Security-Policy header your browser enforces, and connect-src on it is none. Open the network tab and watch nothing happen.